Electric Crane & Hoist Inc. 888-791-9686 ......Chain Hoists, Collector Shoes, Electric Chain Hoist, Hoists, Cranes, Conductor Bar, Festoon, Brakes, Cables, Trolleys, load brakes, gears, crane wheels

You are here: Home > LOAD LIMIT DEVICES

Sort By:

Page of 1

Wire Rope Hoist Load Cell Protection Limiter.

Load Limiter

Our Price: $601.00

Load Cell for Wire Rope Hoists. Easily attaches directly to wire rope cable
and is adjustable to fine tune capacity allowable before up circuitry is disabled.
Allows protection of hoist by disabling excessive loads. This load cell is good for
up to 3300 lbs. per line. Example: Control of a 1 to 1.5 Ton application at
single part reeving or 5 Ton with 4 part reeving. Can be factory set or field adjusted
for custom settings. For larger or different capacities call 888-791-9686 for assistance.

Horn in mounting box

Our Price: $66.00

Pt.#MT4-115-S with IOB-W Horn with surface mounted box. The multi-tone electronic signal is field selectable to provide eight distinct tones. 91-97 dba. standard white color. For indoor applications. 115 Volt operation.

Crane / Hoist Hour Meter

Our Price: $70.60

Keep track of your equipment usage with an inpanel hour meter. This AC Voltage Hour Meter registers Elapsed Time Up to 99999.9 Hours, Bezel Face 2.50 Inches Round, Length from Back to Bezel 2.75 Inches, Elapsed Time Indicators, Non Resettable, Input Voltage 110 to 120 @ 60 Hz, 3 Watts, Numbers White on Black, Decimals Black on White, Material Black Styrene, Indoor Use Only, Continuous Duty Accuracy 100%, Start/Stop Accuracy to Plus/Minus 50 msec, Flange Mounts In 2.25 Inch Diameter Hole, Includes 22 Gauge Wire Leads 6 Inches Long, Mounting Hardware

Panel Mounted Temperature Thermometer

Our Price: $119.50

Keep track of the temperature in your Panels. Switch Plate Thermometer, Digital, 3 Digit LED Display, Temp. Range (F) -40D to 230D, Switch Plate Mounting, Accuracy +/-1%, Line Length (In.) 60, Line Length (Ft.) 5, Sensor Dimension (In.) 1.18 x.27, Power Source 110 VAC, Case Material ABS, Tube Material Plastic Coated, Lens Material ABS, Meets UL, NSF Certified Yes, Includes Battery Back-up Wire Assembly

Lifting Magnet - 2200 Lbs. - MagMate

Our Price: $1,860.00

Easy to use Lifting Magnet, Permanent Type, Lifting Capacity Flat Steel 2200 Lb, Min. Steel Thickness 2 In., Lifting Capacity Round Steel 1100 Lb, Overall Length 12 5/8 In, Magnet Length 10 5/8 In, Magnet Width 7 1/8 In, Magnet Height 6 1/2 In, Conforms to ASME B30.2

Shock Absorbing Lanyard

Our Price: $132.00

Miller� Shock-Absorbing Lanyards
Shock-absorbing woven inner core smoothly expands to reduce fall forces. Snap hooks have 3/4" gate opening; rebar hooks have 2-1/2" gate opening.
Meet OSHA, ANSI, and CSA standards
Manyard� II
Stretch from 4 to 6 ft. to reduce tripping, snagging or dragging. Integral red core for easy visual inspection. Nos. 1XEN9 and 1XEP1 meet ASTM F887-05 arc-flash standard.

Phase Monitor 480 Volt

Our Price: $62.00

Phase monitor relay, provides protection against phase reversal and phase loss; 10A SPDT output contacts, 8-pin octal base. Works with 480V 3-phase systems; compatible with most Delta or Wye configurations. Relay becomes UL Listed when used with socket 70169-D.

Phase Monitor 240 Volt

Our Price: $61.00

Phase monitor relay, provides protection against phase reversal and phase loss; 10A SPDT output contacts, 8-pin octal base. Works with 240V 3-phase systems; compatible with most Delta or Wye configurations. Relay becomes UL Listed when used with socket 70169-D.

Relay Socket for Phase Monitors

Our Price: $7.90

Relay socket, works with all phase monitor relays, 600V rated, 8-pin octal configuration. Can be mounted on 35mm DIN rail or directly mounted to the panel.