Contactors, Transformers, Mainlines, Reversing Contactors, Auxiliary Contacts, Rebuild Kits

You are here: Home > ELECTRICAL CONTROLS

Sort By:

Page of 2

Reversing Contactor 40A

Our Price: $225.00

GMC40X2 40 Amp. Reversing Contactor IEC Type
2NC/2NO Aux. Contacts
3 Poles per side
11kW @ 240V, 18.5kW @ 460V, 22kW @ 550V
110V Coils

Micron Control Transformer 100VA

Our Price: $74.00

Micron Control Transformer, 100VA, PRI: 220x440, 230x460, 240x480, SEC: 110/115/120V with Secondary Fuse Block
Used for most medium duty crane applications. Reduces power for lower control voltage.

Horn - Strobe Combination

Our Price: $162.00

120 VAC MULTI-TONE HORN AND STROBE COMBO
Compact Horn Strobe combo for applications requiring more flash intensity. This economical setup in combination with a Multi-Tone Horn has the following tones: Horn, Bell, March Time Horn, Code-3 Horn, Code-3 Tone, Slow Whoop, Siren, Hi/Lo - all dip switch field selectable.

The Multi-Tone Horn/Strobe is designed with a 1/2" conduit entry at the bottom of the junction box. The strobe light used for this combination is the Tomar Brand Microstrobe.

Crane Lights - Metal Halide for Indoor Service

Our Price: $265.00

Crane Lights
Cast aluminum spring loaded socket and reflector support provides a reliable indoor crane light for 250 DC Mercury Vapor and AC HPS lamps. The highly polished reflector gives a medium beam spread. For additional protection against shock and vibration, include one of the shock mounts illustrated below.

The 250 DC Mercury Vapor fixture & lamp combination utilizes a current limiting resistor for operation of a mercury vapor lamp on 250 DC input voltage. This resistor acts as a special ballast for 250 DC and is intended for overhead crane applications only, not for general illumination.

Crane Cab Heater

Our Price: $475.50

Crane Cab Heater w/ switch
Natural convection heaters are ideal for heating crane cabs, guard houses and other normally unheated areas. All heaters feature heavy-duty wirewound heating elements mounted in a rugged galvanized steel enclosure with perforated cover. All units are suitable for floor or wall mounting and have convenient knockouts for permanent conduit installation. Heavy-duty DC rated switches are also available for on/off or multiple heat settings.

Crane / Hoist Hour Meter

Our Price: $70.60

Keep track of your equipment usage with an inpanel hour meter. This AC Voltage Hour Meter registers Elapsed Time Up to 99999.9 Hours, Bezel Face 2.50 Inches Round, Length from Back to Bezel 2.75 Inches, Elapsed Time Indicators, Non Resettable, Input Voltage 110 to 120 @ 60 Hz, 3 Watts, Numbers White on Black, Decimals Black on White, Material Black Styrene, Indoor Use Only, Continuous Duty Accuracy 100%, Start/Stop Accuracy to Plus/Minus 50 msec, Flange Mounts In 2.25 Inch Diameter Hole, Includes 22 Gauge Wire Leads 6 Inches Long, Mounting Hardware

Panel Mounted Temperature Thermometer

Our Price: $119.50

Keep track of the temperature in your Panels. Switch Plate Thermometer, Digital, 3 Digit LED Display, Temp. Range (F) -40D to 230D, Switch Plate Mounting, Accuracy +/-1%, Line Length (In.) 60, Line Length (Ft.) 5, Sensor Dimension (In.) 1.18 x.27, Power Source 110 VAC, Case Material ABS, Tube Material Plastic Coated, Lens Material ABS, Meets UL, NSF Certified Yes, Includes Battery Back-up Wire Assembly

Light Duty Plug-In Spring-Rewind Cord Reel

Our Price: $61.40

Cord Reel, Light Duty Plug-In Spring-Rewind, 125 Volt Cord with 30 ft. length. Up to 10 Amp capacity.

Hazardous-Location Air Conditioners

Our Price: $2,471.00

Hazardous-Location Air Conditioner. UL listed for Class 1, Division 2, Groups A, B, C, D hazardous locations. These air conditioners have an adjustable temperature control, adjustable louvers for directing airflow, and a slide-out chassis for easy maintenance. Units are single phase, operate on 208-230 VAC, 60 Hz, and have leads for hardwiring. Mount in a window 27 7/8" to 42" wide or through a wall with a maximum thickness of 6". MCM1817K79 requires a 16 3/8" Ht. x 26 3/16" Wd. wall cutout. Perfect for crane
cabs.

Phase Monitor 480 Volt

Our Price: $62.00

Phase monitor relay, provides protection against phase reversal and phase loss; 10A SPDT output contacts, 8-pin octal base. Works with 480V 3-phase systems; compatible with most Delta or Wye configurations. Relay becomes UL Listed when used with socket 70169-D.

If we can offer any additional information, please don't
hesitate to call Wayne or Chris at 888-791-9686.